Waterproofing Repair
Permaflex Is Unique
Three Unique properties allow Permaflex products to
completely waterproof and retain negative hydrostatic pressure
unlike any other products in the world.
Flexible Penetration Technology®
Elongation Memory Technology®
Permanent Flexibility® |
 |
| Flexible Penetration
Technology® allows Permaflex to penetrate into the pores
of the substrate to produce tiny solid rubber sealing plugs.
|
| Elongation
Memory Technology® ensures that when Permaflex products
are compressed and relaxed, they maintain their original shape
and size. The major cause of release of coatings is from powerful
forces such as freeze/thaw cycles, ground water pressure,
vibration and sudden shock. |
| Permanent
Flexibility® provides that Permaflex products never become
brittle: they maintain flexibility and only become stronger
with age without breaking down as other coatings do. |
|
| With Permaflex products, you will never again
worry about future repairs or structure damage that inhibits
Permaflex’s ability to waterproof. Permaflex has the
ability to molecularly bond, or weld to itself, new-to old
at any stage of curing or age. No other building material
has this unique quality. |
|
|
|
Permanent indoor
basement waterproofing
Basic Product Line |
|
| AR- Permaflex:
Used for priming and top coating, extremely trouble-free,
easy to use product. |
| LRB (Liquid
Rubber Base): Used to cure at any thickness of application,
never produces gas during curing, and molecularly welds to
itself new to old, extremely trouble-free, easy to use product.
|
| TAV (Thickening
Activator): Used only with LRB to increase viscosity to provide
thickness of vertical application and uniform curing regardless
of thickness of application. |
| Quick-Patch:
Hard, extremely strong, quick curing, Concrete Repair Fluid.
|
| Permaflex-
AL: Has many of the qualities of Permaflex but is stronger
and less flexible than Permaflex. |
| back
to top |
|
| PERMAFLEX products maintain
permanent flexibility and never become brittle: they only
become stronger with age, Permaflex®, penetrates deep
into the pores of the substrate and produces tiny solid
rubber sealing plugs. These plugs, or capillary filled sealing
tentacles, in each and every pore or crack in the substrate
surface act as tiny, high pressure, hydraulic o-rings. The
tentacles seal, anchor and lock the coating membrane surface
to the substrate, permanently!
LRB is a single component liquid rubber
material used to fill, seal and reinforce Permaflex in large
holes, cracks, joints and other such larger areas while
allowing Permaflex to handle the tiny, microscopic areas.
LRB/TAV can be applied to any thickness in one application
and will cure throughout its entirety in four hours. As
a stand-alone product, LRB will self-level at any application
thickness, whereas the addition of TAV allows the slump-free
application on vertical, horizontal or inverted surfaces
without running or sagging.
back to to
Simple 1-2-3
application
1. Prime with Permaflex
back to top
2. Apply LRB / TAV mixture to joints and cracks
back to top
3. Topcoat with Permaflex
back to top
This three step process assures that every crack, hole, joint
and crevice is permanently sealed. Experience has proven that
a simple single application of something is not worth the
effort it takes to apply it, but by using Permaflex’s
simple 1-2-3 application process you are triple protected.
This assures that all imperfections are filled and sealed
the first time for the last time!
Concrete Crack Repair and Sealing
back to top
Contact Us Now
|
